Knowledge popularization and community installation process of 2/3 wheel electric vehicle charging stations.

Knowledge popularization and community installation process of 2/3 wheel electric vehicle charging stations.

Many people encounter some minor problems while using charging stations, although these problems are not significant and can be annoying.

1. Overcurrent protection: When the external load exceeds 15% of the rated current of the charging pile manufacturer, the system will automatically cut off the power supply.

2. Zero current shutdown function. When the charging is completed and the current drops to 0.5A, the rear charging station manufacturer's ranking platform system will automatically shut down to prevent users from not shutting down voluntarily. If there is a fault later, the charging stop button at the pile side will be urgently pressed.

Charging piles have a series of protective functions for new energy charging pile manufacturers, as follows.

1. The charging station guidance function signal is connected to the charging completion station pilot signal of the vehicle. Charging can only be carried out when the connection is normal. If the signal is changed during the charging process of the charging station manufacturer, the output switch will be turned off for 80 milliseconds to stop charging.

2. The function of the bidirectional switch is that the output circuit of the charging station adopts a bidirectional car charging station manufacturer switch. When the charging stops, the bidirectional switch can be turned off to achieve complete physical separation between input and charging.

Nowadays, new energy vehicles are the choice for consumers to purchase cars through charging stations. New energy vehicles can be driven by electricity, but what is the installation process of charging stations for residential cars? The steps to turn off the charging station key for pure electric cars during the installation process of residential car charging stations are to determine the charging conditions, the key is whether there is a fixed parking space, and whether the hotel agrees to install the charging station.

After the user signs an intention agreement to order a car with the car manufacturer or 4S dealer's charging station solution store, please follow the procedure to confirm the conditions of the community's car charging station. The materials currently required include:.

1) Purchase intention for charging station OEM contract.

2) The applicant's identification document.

3) Proof of property or usage rights for fixed parking spaces.

4) Application for installing customized electric vehicle charging stations in parking spaces (approved by the property seal).

5) A floor plan (or on-site environmental photo) of the parking space (garage).

2. After accepting the user's application, the ODM of the charging station, the car manufacturer or 4S store will verify the authenticity and completeness of the user data, and they will cooperate with the power supply company to conduct electricity and construction feasibility on-site according to the agreed investigation time.

3. The power supply company is responsible for confirming the user's power supply conditions and completing the preparation work for the "Preliminary Feasibility Plan for Self use Charging Facility Electricity Use", and OEM charging piles.
Hot Keywords: home charger Fast charging Portable Charger